References
Amphibious vehicles
SWIMBUS 12.01
In this complex prototype development project, we carried out design tasks related to ship operations. In many cases, solving unique problems typical of multifunctional vehicles posed the greatest challenge. Since the planned vehicle must simultaneously fulfill the roles of both a ship and a bus, in accordance with relevant regulatory requirements, we often encountered technical tasks beyond the usual ship design practice, which we successfully completed.
Amphibious hydraulic excavator
Analysis of stability and buoyancy and operating range of amphibious crawler excavators as part of a university thesis.
Passenger ships
Szent Benedek
During this project, our task was to refit the piping and the propulsion system of a 20 m passenger ship navigating on Lake Balaton.
44,9 m passenger catamaran
During the project, we finalized the plans of a 44.9 m passenger ship in accordance with the customer’s requirements. Our main task was to increase the capacity from 250 people in such a way that even after the changes, the ship meets the standards and regulations.
Szélkirálynő
In this refit project we prepared consturction plans after laser scanning the structure of the ship. At the stern, the the hull was modified, engines suitable for active steering were installed and a keel was placed. The deck was also transformed in the stern and bow.
Sea-going yacht
During the project, we prepared 3-dimensional conceptual plans for the interior transformation of the ship in accordance with the customer’s needs.
Cargo ships
Dona refit
During the project, we completed the conversion of a self-propelled JB&Z-FRATERNITE type cargo ship built in 1939 into a pushed barge.
VI Barge
In this project, the ship’s owner set the goal of making a self-propelled ship suitable for carrying out waste disposal tasks in the Tisza-river. For this purpose we had to use a barge constructed in 1979.
Z429
During the project, our task was to refit a Z400 type self-propelled dry cargo ship. The goal of the ship’s owner was to create a ship suitable for carrying out waste disposal tasks in the Tisza-river
VIKIV barge
During the project, we designed a cargo barge using Waterking GP-H112 and BE-H112 modular type pontoons.
Floating equipments
MAHARD-107
This floating equipment is suitable for various operations carried out on water with a mobile work machine installed on the deck. During the project, we replaced the hydraulic excavator on board and made modifications of the pontoon. In a later phase, the operating range of the floating equipment was extended from zone 3 to zone 2.
MAHARD-108
This floating equipment is suitable for various operations carried out on water with a mobile work machine installed on the deck. The floating equipment can be used in two configurations; equipped with a truck crane and a pile driver. We carried out the planning, the related calculations and the documentation of the floating equipment.
MAHARD-108 A-B
This floating equipment is suitable for various operations carried out on water with a mobile work machine installed on the deck. The floating equipment is equipped with two anchor piles. During the project we completed the design of the machine and the approval documentation.
VIKIV floating equipment
During the project, we designed a floating equipment, with a hydraulic excavator placed on board, using Waterking GP-H112 and BE-H112 modular type pontoons.
SM ponton
In this project our task was to design a pontoon structure suitable for receiving a piling system developed by the GANZ Danubius Watercraft and Crane kft.), which can be attached to the Soil-Mec modular pontoon system.
Bercel
This floating equipment is suitable for various operations carried out on water with a mobile work machine installed on the deck. During the project, we replaced the hydraulic excavator on board and we carried out the related planning and documentation.
Optimus floating equipment
During this project, the goal was to create a floating equipment that can perform piling work even in narrow working areas, keeping in mind the cost optimization of the project.
Optimus stage
During this project, our task was a floating equipment refit. The goal was that after the refit, the floating equipment could function as a concert stage, but it could also be converted back into the original floating equipment if needed.
Multipurpose floating equipment
In this project, we had to design three types of floating equipment formations using Baars-type modular pontoon elements. The main floating equipment was a pontoon platform designed to accommodate a 71-ton piling machine, which, after piling work was completed, could be dismantled into two independently operating floating equipments capable of accommodating hydraulic excavators.
S 3500 Dredger with Conveyor Belt
The dredger consists of the dredger itself and an associated conveyor belt system. It was constructed by different pontoon modules. It performs dredging operations (extraction of sand and gravel) from the water. We made the documentation from the existing floating equipment for approval by the Hungarian authorities.
MAHARD 7112 type floating equipment
The vessel is equipped with a mobile excavator machine on the deck, suitable for various water construction and cargo handling tasks. The excavator on the deck was replaced with another type; the permitted operating zone for the floating equipment was expanded from the 3rd navigation zone to the 2nd navigation zone, and auxiliary equipment was refited. We made documentation and associated calculations for these changes.
ÉDUVÍZ 502 dry cargo barge
The operating zone for the barge was extended from the 3rd navigation zone to the 2nd navigation zone, we checked the compliance with the new operating conditions.
Small crafts
TATN
Our task was to design and create documentation for construction of a prototype boat with a length of 7 meters based on the sample boat provided by the client. The prototype was the first vessel of a production line.
Ezüst Villám
Our task was to design and prepare documentation for a prototype boat with a length of 11.78 meters based on the sample boat provided by the client.
Csíbor small boat
During the project, we made the documentation from an existing open-decked aluminum small boat for approval by the Hungarian authorities. This project involved the adaptation of the vessel to meet domestic operational standards and regulatory requirements.
Rozmár small boat
During the project, we made the documentation from an existing open-decked aluminum small boat with a superstructure for approval by the Hungarian authorities. This project involved the adaptation of the vessel to meet domestic operational standards and regulatory requirements. The small boat is intended to serve the floating equimpent at the worksite.
STAGE-12
During the project, our task was to expand the functions of a WIA UH425 Turistic type multifunctional hybrid drive boat according to the client’s requirements. Accordingly, the constructed boat is capable of functioning as a water stage with adjustable dimensions and the ability to change location.
Ramatel-1
During the project, we made the documentation from an existing open-decked aluminum small boat for approval by the Hungarian authorities. This project involved the adaptation of the vessel to meet domestic operational standards and regulatory requirements. The small boat is intended to serve floating equimpent at the worksite.
Ramatel-2
During the project, we made the documentation from an existing open-decked aluminum small boat for approval by the Hungarian authorities. This project involved the adaptation of the vessel to meet domestic operational standards and regulatory requirements. The small boat is intended to serve floating equimpent at the worksite.
Floating structures, floating houses, docks
Tiszayacht type pontoons
Our task during the project was to design modular type pontoons with dimensions and load-bearing capacity specified by the client, suitable for anchoring with piles.
Floating House
Our task was to design the buoyant part of a floating house, to be installed on a private lake for private use. During the project, collaborating with architectural engineers designing the structure, we developed a floating structure suitable for serving as the foundation of a lightweight residential house on water, compliant with Eurocode standards.
Hellowood Floating Pool
Our task during the project was to develop conceptual designs for a wooden floating pool on the Danube. Conducting tests on multiple sizes of floating structures and summarizing the results in a study. This study was part of the feasibility study prepared by Hello Wood Studio.
Lupa Lake Type Pontoon
From a combination of the pontoon elements, any type of dock system and floating boat pier can be freely configured.
Mátra
The project involved the refit design of the ex. Mátra. After a change in ownership, our company was tasked to design and create the approval documentation of the refit. The aim of the refit was to build a superstructure on the main deck between the existing two deckhouses, with an upper deck equipped with a canvas roof. Additionally, a sanitary room and living space are to be created in the existing rear deckhouse.
VOGUE Terrace Pontoon
Our task during the project was to design the refit of a floating structure that functions as a port for large boat according to the client’s requirements.
Érd-Lake Pontoons
During the project, our task was to design pontoon bridges connecting islands on an artificial lake, as well as an L-shaped floating dock for boats.
Ports, marinas, piers
Mályi Sunbathing Deck
Designing and obtaining permits for a sunbathing deck constructed from modular plastic floats on the lake located in the administrative area of Mályi.
Kékszalag Marina – Balatonfüred
Our task was to design and prepare the regulatory documentation for a marina that integrates into an existing pile system using Mahart Tiszayacht type pontoons.
Tiszaug Marina
Obtaining modification and occupancy permits for the expansion of an existing small boat marina.
Alsóörs Ezüsthíd marina
Obtaining the existing marina’s retaining and seasonal operational permits, along with the establishment plan for the marina’s entrance markers.
Sygnus Loading Port
In Paks, on the Danube, we designed a floating large vessel loading dock. We made the approval and construction documentation for the floating structure of the port, as well as the establishment plans for the dock.
Sygnus Small Boat Marina
In Paks, on the Danube, we designed a small boat marina. We made the approval and construction plans for the floating structure of the marina, as well as the establishment plans for the marina.
Reverse engeneering
Moselland
During the project, we created a high-quality hull model of a 27-meter passenger ship (using a 3D scanner) for stability and buoyancy assessment purposes.
Crowline E6 Canopy Design
We created a 3D hull model for the canopy design of the Crowline E6 canopy machine (for the cover canopy pattern) based on a laser-scanned point cloud.
Pontoon Renovation
Our task in this project was to design the renovation of a 25-meter-long pipe pontoon hull, which serves as a part of a floating equipment. The existing floating structure had suffered irreparable damage in several places, necessitating the replacement of the pontoon hull while maintaining its compatibility with the floating equipment. Additionally, based on previous operational experiences, we made structural modifications in certain areas to strengthen the structure.
Propeller Survey
During the project, due to the replacement of the yacht’s engine, we needed data on the existing propeller, which the propeller manufacturer could not provide. For this purpose, we conducted a 3D survey of the propeller and created its three-dimensional model.
System designs
ClonBio Water Intake Facility
Designing the mechanical and piping systems of a water intake facility for the existing floating structure at the harbor.
Design of Steering System Actuating Mechanism
Our task in this project was to design the mechanism actuating the existing steering system of a 45-meter passenger vessel. The catamaran-shaped hull already had two rudders, steering shafts, and steering tube sockets, so the challenge was to design the steering actuating mechanism that conforms to these specifications while also considering client requirements and regulatory standards, ensuring manufacturability, efficiency, and cost-effectiveness of the components.
Replacement of the main engine for Icebreaker “Jégvirág X.”
Our task involved completing all engineering work related to the replacement of the main engine of the icebreaker named “Jégvirág X.” and make the regulatory approval plans.
Engineering calculations and analysis
SB12.01 Underrun protection
Our task was to verify the roadworthiness compliance of an underrun protection for an amphibious vehicle using finite element analysis, followed by revising the results with a 1:1 scale model under the supervision of experts from the Institute of Transportation Sciences.
Fluid Dynamics Analysis of SB12.01
In this project, we examined the fluid dynamics characteristics of the SB12.01 type amphibious vehicle. The goal was to find solutions to reduce resistance caused by water flow during the vessel’s navigation, thereby increasing travel speed and optimizing vehicle fuel consumption.
eSWIMBUS Stability
Our task in the project was to make the stability documentation for a prototype vehicle, related to the development of the propulsion system for an SB12.01 type amphibious passenger bus.
Strength analysis of stage roof for zone 2 navigation
As part of the conversion of a floating equipment, we conducted the examination and documentation of the compliance of a stage roof assembled from commercially available modular elements for use in Zone 2 navigation and installation on the specific vessel.
Designing bilge keels
Our task in the project was to design bilge keels to reduce the rolling motion of the vessel of three different sea-going floating cranes operating in R3 zones.
Plate Thickness Measurement
Our task was to measure the plate thickness of several floating equipment during their periodic inspections and document the results for submission to the Hungarian Maritime Authority.